Snap-In Cable Tie Mount


• For use with standard cross section cable ties: PLT1S, PLT1.5S, PLT2S, PRT1.5S, and PRT2S
• Integral retaining notch holds cable tie head in place below bundle
• Eliminates protruding tie head and facilitates one hand tie threading
• Quickly route wire and cable where mounting holes cannot be drilled
• Rubber-based adhesive provides a strong and reliable bond
• For indoor use only
• Material: ABS .

Screw Mount


• Low profile design holds wires, cables, and tubing
• Convenient releasable latch
• Large mounting base for high bonding strength
• For indoor use only .

Stud Mount


• Integral mount pushes onto a threaded stud and tie wraps around bundle
• Mid-mount style (PLST_SC) centers the wire bundle over the stud
• Tie can be removed from the stud by turning counterclockwise
• Releasable style available (PRST)
• Curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed installation
• Heat Stabilized material for high temperature applications up to 239°F (115°C) – indoor use
• Heat Stabilized Weather Resistant material has greater resistance to damage caused by ultraviolet light and for high temperature applications up to 212°F (100°C) – indoor or outdoor use .

Push Mount


• Cables are easily snapped into or out of clips
• Winged design holds mount in place even in applications where vibration is present
• Design of wing provides added stability .

Wood Push Mount


• Used to secure wire, cable, or tubing to wood surfaces
• Barbed design holds mount in place – rated for 60 lb. pullout .

Push Mount Ties


• Combines cable tie, mount and fastener into a single part
• Used to attach bundles to another surface such as a flat panel
• Anchor is easily pressed into a pre-formed hole and locks in place
• Wings provide constant tension for a stable, secure and rattle-free installation
• Stainless steel locking barb provides consistent performance, reliability and infinite adjustability through entire bundle range
• Curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed installation
• Materials available for indoor or outdoor use .

Epoxy Applied 2-Way Swivel Mount


• Mount swivels 360° to assure proper orientation with harness.
• Four inspection holes to check adhesive coverage
• For indoor use only .

Corrugated Tubing Holder with Push Mount


• Use to secure and route all standard sizes of solid wall or slit corrugated loom tubing
• Ribs prevent lateral movement of corrugated loom tubing along the mount
• Rugged clip prevents accidental disassembly of tubing due to shock or vibration .

Sta-Strap® Panel Mount Ties


• Greater resistance to damage caused by ultraviolet light and for high temperature applications up to 212°F (100°C) – indoor or outdoor use
• Unique design allows tie to secure a bundle directly to a chassis or panel without the need for separate fasteners or mounting devices
• Releasable prior to final tensioning for bundle modifications
• Engages clearance hole with optional centering pilot to prevent tie from shifting or abrading in high vibration environments

Pan-Ty® Center Mounted Wing Push Mount Cable Ties


• For high temperature applications up to 239°F (115°C) – indoor use
• Used to center the bundle over the mount on all bundle diameters
• Use PLWP30,40,50SC for normal wire bundles
• PLWP40SD have a convoluted tubing bump that prevents lateral and axial movement on convoluted tubing
• PLWP50SE have a convoluted tubing bump that prevents lateral movement on convoluted tubing
• Cable tie, mount, and fastener in a single part
• Anchor is easily pressed into a pre-formed hole and locks in place
• Wings provide constant tension for a stable, secure and rattle-free installation
• Curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed installation